Startseite der Technischen Universität Dresden

Startseite » ... » Fakultät Elektrotechnik und Informationstechnik » Elektrotechnisches Institut » Elektrische Maschinen und Antriebe
Sections

EMA » Forschung » Publikationen seit 2007

2017
[187] Kenneth Benath: Analyse und Auslegung energieeffizienter Servoantriebssysteme am Beispiel von Punkt-zu-Punkt-Bewegungsaufgaben, Hrsg.: W. Hofmann, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Band 10, 256 Seiten, ISBN 978-3-8440-5414-9, August, 2017.
[186] D. Bernet, R. Seifert: Switching Loss Minimization using Two-Configuration Predictive Control for a Thermo-Hydraulic Linear PMSG, PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Nürnberg, Germany, 2017.
[185] S. Bosch, J. Staiger, H. Steinhart: Single-Phase PWM-Based Unity Power Factor Rectifier with Adaptive Predictive Current Control, PCIM Europe 2017; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, pp. 6, 2017.
[184] S. Bosch, H. Steinhart: Comparison of Fundamental Active and Reactive Power Determination Methods in Single-Phase Systems, PCIM Europe 2017; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, pp. 7, 2017.
[183] G.-H. Geitner, G. Komurgoz: Generic power split modelling for compound epicyclic four-speed gears, Mechanism and Machine Theory, 116C, pp. 50 - 68, 2017.
[182] F. Hänel, R. Seifert, G. Kunze, W. Hofmann: Thermohydraulischer Lineargenerator – Basis für einen dieselelektrohydraulischen Hybrid, 6. Fachtagung – Hybride und energieeffiziente Antriebe für mobile Arbeitsmaschinen, 2017.
[181] Jakob Jung: Konzentration des Permanentmagnetflusses durch Segmentierung des Stators am Beispiel einer Axialflussmaschine in TORUS-Bauart, Hrsg.: W. Hofmann, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Band 9, 186 Seiten, ISBN 978-3-8440-5153-7, April, 2017.
[180] J. Jung, W. Hofmann: Axialflussmaschine mit segmentiertem Stator für den Antrieb eines Elektrofahrrads, Freiberger Kolloquium Elektrische Antriebstechnik, Freiberger Forschungshefte A925 Elektrische Antriebstechnik (ISBN 978-3-86012-556-4), 8 Seiten, Juni, 2017.
[179] T. Micklitz, W. Hofmann: Design of a Distributed Winding on a Ceramic Carrier for an Ironless, High Speed Axial-Flux PM-Machine, Int. Conf. on Electrical Machines and Systems ICEMS 2017, pp. 6, 2017.
[178] S. Miersch, U. Schuffenhauer, N. Michalke, T. Schuhmann: Forcierte Kühlung zur Steigerung der Ausnutzung permanentmagneterregter Außenläufermaschinen, Freiberger Kolloquium Elektrische Antriebstechnik, Freiberger Forschungshefte A925 Elektrische Antriebstechnik (ISBN 978-3-86012-556-4), Juni, pp. 6, 2017.
[177] J. Pecho, W. Hofmann: Analytical Approach and Solution for Start-up Behavior of Line-Start Permanent Magnet Synchronous Machines (LSPSM), Int. Electrical Machines and Drive Conf. 2017, pp. 8, 2017.
[176] N. Remus, M. Leubner, K. Köthe, W. Hofmann: One-Step Commutation Approach for Direct Converters Based on UCE-Measurement, European Poewer Electronics Conference, EPE 2017, pp 10, 2017.
[175] R. Seifert, E. Fleischer, W. Hofmann: Experimentelle Bestimmung der Rotorverluste eines dreipoligen kombinierten Radial-/Axialmagnetlagers aus Pulververbundwerkstoffen, 11. Workshop Magnetlagertechnik Zittau-Chemnitz 2017, Tagungsband S.27-34, pp. 27 - 34, 2017.
[174] J. Staiger, S. Bosch, H. Steinhart: Application of a Buck-Boost Converter for Highly Dynamic Power Smoothing in Industrial Applications, PCIM Europe 2017; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, pp. 8, 2017.
[173] Rahmat Suryana: Optimal Operation of Wind Power Plants with Doubly-fed Induction Generators under Considerations to Network Operator Regulations, Hrsg.: W. Hofmann, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Band 10, 134 Seiten, ISBN 978-3-8440-5281-7, Juni, 2017.
 
2016nach oben
[172] F. Bahr, I. Mönch, D. Ernst, T. Zerna, O. G. Schmidt, W. Hofmann: Direct Field Control of AMBs using Flux Feedback based on Integrable Hall Sensors, The 15th International Symposium on Magnetic Bearings – ISMB15, Kitakyushu, Japan, 2016.
[171] S. Bosch, H. Steinhart: Hybrid filter with an optimized switching method of the compensation capacitors and predictive active filter control, PCIM Europe 2016; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, pp. 8, 2016.
[170] S. Bosch, H. Steinhart: Active power filter with model based predictive current control in natural and dq frame, 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe), pp. 10, 2016.
[169] D. Ernst, J. I. Mönch, F. Bahr, W. Hofmann, O. G. Schmidt, T. Zerna: Flexible Magnetic Field Sensors with Ultra-Thin Silicon Interposer, 6th Electronics System-Integration Technology Conference (ESTC), Grenoble, France, 2016.
[168] E. Fleischer, W. Hofmann: Linear and nonlinear control of a three pole combined radial and axial active magnetic bearing - a comparison, Bulletin of the JSME Mechanical Engineering Journal, Vol.3, No.1 (2016), 13 pages, 2016.
[167] G.-H. Geitner, G. Kömürgöz: Generalised Power Flow Model for Electric Machines, 42th Annual Conference of the IEEE Industrial Electronics Society (IECON), Firenze, Italy, pp. 1662 - 1669, 2016.
[166] G. Kömürgöz, G.-H. Geitner: Application of the unified electric motor Bond Graph model to HB-type and PM-type Vernier machines, 42th Annual Conference of the IEEE Industrial Electronics Society (IECON16), Firenze, Italy, pp. 4263 - 4268, 2016.
[165] M. Leubner, N. Remus, M. Stübig, W. Hofmann: Active stabilization of direct matrix converter input side filter through grid current control, IEEE Applied Power Electronics Conference - APEC, Long Beach, CA USA, pp. 2175 - 2181, 2016.
[164] N. Remus, M. Leubner, W. Hofmann: Efficiency Comparison of Active and Passive Grid Filter Damping Methods using Direct Matrix Converter, European Power Electronics and Applications - EPE, Karlsruhe, Germany, 2016.
[163] Jörg Schützhold: Auswahlsystematik für energieeffiziente quasistationäre elektrische Antriebssysteme am Beispiel von Pumpen- und Förderbandanlagen, Hrsg.: W. Hofmann, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Band 8, 182 Seiten, ISBN 978-3-8440-4871-1, November, 2016.
[162] R. Seifert, W. Hofmann: Analytical Asymmetric Air Gap Model for Active Magnetic Thrust Bearings of Mixed Materials Including Eddy Currents, ISMB15 - International Symposium on Magnetic Bearings, 2016.
 
2015nach oben
[161] N.v. Binh, W. Hofmann: Experimentelle Untersuchungen am synchronisierten doppelgespeisten Asynchrongenerator bei Spannungsfehlern, VDI/VDE-Tagung Antriebssysteme 2015 Elektrik, Mechanik Fluidtechnik in der Anwendung, VDI-Berichte 2268, Aachen, Deutschland, pp. 89 - 104, 2015.
[160] Nguyen Van Binh: Control of synchronized doubly-fed induction generator under grid conditions, Hrsg.: Univ.-Prof. Dr.-Ing. Wilfried Hofmann, Band 6, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Shaker Verlag, Aachen, 198 Seiten, Nov., 2015.
[159] J. Doering, W. Hofmann: Design of a Transverse Flux Reluctance Machine with Mutual Flux Paths and Disc Rotors, European Power Electronics and Applications - EPE, Geneva, Switzerland, 2015.
[158] J. Doering, W. Hofmann: Comparison of magnetic circuit design methods of transverse flux reluctance machines, IEEE IEMDC, 2015.
[157] J. Doering G. Steinborn, W. Hofmann: Torque, Power, Losses and Heat Calculation of a Transverse Flux Reluctance Machine With Soft Magnetic Composite Materials and Disc-Shaped Rotor, IEEE Transactions on Industry Applications , vol. 51, no. 2, pp. 1494 - 1504, 2015.
[156] C. Evers, J. Schützhold, K. Benath, R. Blümel, V. Müller, W. Hofmann: Design Rules for Energy Efficient Servo Drives and Mechanical Systems on the Example of Cross Cutting Machines, European Power Electronics and Applications - EPE, Geneva, Switzerland, 2015.
[155] C. Evers, J. Schützhold, K. Benath, R. Blümel, V. Müller, W. Hofmann: Projektierungsregeln für energieeffiziente Servoantriebssyteme am Beispiel einer Quersiegeleinheit von Verpackungsmaschinen, VDI/VDE-Tagung Antriebssysteme 2015 Elektrik, Mechanik Fluidtechnik in der Anwendung, VDI-Berichte 2268, Aachen, Deutschland, pp. 157 - 168, 2015.
[154] Marco Festa: Berechnung elektrischer Maschinen auf gekoppelten elektromagnetischen und kühltechnischen Modellebenen am Beispiel quergekühlter Motoren, Hrsg.: Univ.-Prof. Dr.-Ing. Wilfried Hofmann, Band 7, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Shaker Verlag, Aachen, 198 Seiten, 2015.
[153] G.-H. Geitner, G. Kömürgöz: Power flow modelling of dynamic systems - introduction to modern teaching tools, 12 pages, arXiv.org, Systems and Control, Dynamical Systems or Physics Education, Cornell University Library, 2015.
[152] S. Günther, W. Hofmann: Multi-Objective Tradeoffs in the Design Optimization of Synchronous Reluctance Machines for Electric Vehicle Application, IEEE International Electric Machines and Drives Conference – IEMDC, Coeur d’Alene, USA, pp. 1715 - 1721, 2015.
[151] W. Hofmann, M. Stiebler: Kap. V: Elektrotechnik in DUBBEL Taschenbuch Maschinenbau, Hrsg.: K.-H. Grote und J. Feldhusen, Springer Berlin, 24. Auflage, pp. V1-90, 2015.
[150] J. Jung, W. Hofmann: Comparison of two Concentrated Winding Topologies applied on an Axial Flux Permanent Magnet Machine, European Power Electronics and Applications - EPE, Geneva, Switzerland, 2015.
[149] Henning Kasten: Verbesserung der Betriebseigenschaften elektrischer Maschinen durch den Einsatz kombinierter Wicklungen, Hrsg.: Univ.-Prof. Dr.-Ing. Wilfried Hofmann, Band 5, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Shaker Verlag, Aachen, 168 Seiten, Juni, 2015.
[148] M. Melzer, J. I. Mönch, D. Makarov, Y. Zabila, G. S. Bermudez, D. Karnaushenko, S. Baunack, F. Bahr, C. Yan, M. Kaltenbrunner, O. G. Schmidt: Wearable Magnetic Field Sensors for Flexible Electronics, Advanced Materials, Weinheim, Band 27 (2015) Heft 7, pp. 1274 - 1280, 2015.
[147] V. F. Mendes, C. V. de Sousa, W. Hofmann, S. R. Silva: Doubly-fed induction generator ride-through fault capability using resonant controllers for asymmetrical voltage sags, IET Renewable Power Generation, Vol. 9, Iss. 7, pp. 783 - 791, 2015.
[146] I. Mönch, F. Bahr, M. Melzer, D. Karnaushenko, D. Makarov, W. Hofmann, O. G. Schmidt: Flexible Hall Sensorics for Flux Based Control of Magnetic Levitation, IEEE Transactions on Magnetics, Vol. 51, No. 11, pp. 4, 2015.
[145] C. D. Nguyen, W. Hofmann: Model-Based Loss Minimization Control of Interior Permanent Magnet Synchronous Motors, IEEE International Conference on Industrial Technology - ICIT, Sevilla, 2015.
[144] N. Remus, M. Leubner: Direct Control Method for Matrix Converter with Stabilisation of the Input Current, European Power Electronics and Applications - EPE, Geneva, Switzerland, 2015.
[143] R. Seifert, F. Bahr, W. Hofmann: Modellierung axialer Magnetlager aus Stahl- und SMC-Komponenten mit Wirbelstromeffekten, 10. Workshop Magnetlagertechnik, Tagungsband, Zittau, pp. 5 - 11, 2015.
[142] S. Staudt, a. Stock, T. Kowalski, J. Teigelkötter: Raw Data Based Model and High Dynamic Control Concept for Traction Drives powered by Synchronous Reluctance Machines, IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), Torino, Italy, August, 2015.
[141] S. Staudt, J. Teigelkötter, T. Kowalski, A. Stock: High-performance Synchronous Reluctance Motors in Low-voltage Applications, 17th European Conference on Power Electronics and Applications (EPE’15 ECCE-Europe), Geneva, Switzerland, September, 2015.
[140] A. Stock, J. Teigelkötter, S. Staudt, T. Kowalski: The Doubly Fed Permanent Magnet Synchronous Machine as a Highly Efficient Drive System for Constant Speed Applications, IEEE 11th International Conference on Power Electronics and Drive Systems (PEDS), Sydney, Australia, June, 2015.
[139] R. Suryana, W. Hofmann: Wind Farm Contribution to Primary Frequency Control, European Power Electronics and Applications - EPE, Geneva, Switzerland, 2015.
[138] T. Windisch, W. Hofmann: A Comparison of a Signal-Injection Method and a Discrete-Search Algorithm for MTPA Tracking Control of an IPM Machine, European Power Electronics and Applications - EPE, Geneva, Switzerland, 2015.
[137] T. Windisch, W. Hofmann: Loss minimizing and saturation dependent control of induction machines in vehicle applications, Industrial Electronics Society, IECON 2015 - 41st Annual Conference of the IEEE, pp. 1503-1535, 2015.
 
2014nach oben
[136] H. Barth, W. Hofmann: Decrease of SiC-BJT driver losses by one-step commutation, Int. Power Electronics Conference , IPEC-2014 - ECCE-ASIA, Hiroshima, pp. 2881 - 2886, 2014.
[135] H. Barth, W. Hofmann: Efficiency increase of SiC-BJT inverter by driver loss reduction with one-step commutation, IEEE 26th. Int. Symposium on Power Semiconductor Devices & IC’s (ISPSD 2014) , Hawaii, pp. 233 - 236, 2014.
[134] K. Benath, J. Schützhold, W. Hofmann: Advanced design rules for the energy optimal motor-gearbox combination in servo drive systems, Int. Symp. on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2014, Ischia, pp. 94 - 99, 2014.
[133] N.v. Binh, W. Hofmann: Low Voltage Ride-Through Control of Doubly-Fed Induction Generator at Synchronism, IEEE International Conference on Electrical Machines - ICEM, Berlin, pp. 797-803, 2014.
[132] D. Ernst, M. Melzer, D. Makarov, F. Bahr, W. Hofmann, O. Schmidt, T. Zerna: Packaging Technologies for (Ultra-)Thin Sensor Applications in Active Magnetic Bearings, IEEE 37th International Spring Seminar on Electronics Technology ISSE 2014, Dresden, Germany, 2014.
[131] E. Fleischer, W. Hofmann: Linear and Nonlinear Control of a Three Pole Combined Active Magnetic Bearing - a Comparison, 14th International Symposium on Magnetic Bearings, pp. 13-18, 2014.
[130] G.-H. Geitner, G. Kömürgöz: Power Flow Modelling Based Electric Drive Control Optimization, 11th ELECTRIMACS - International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, pp. 622-627, Valencia, Spain, 2014.
[129] S. Günther, S. Ulbrich, W. Hofmann: Efficient Driving Cycle-Based Design Optimization of Interior Permanent Magnet Synchronous Motor Drives for Electric Vehicle Application, Int. Symp. on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2014, Ischia, pp. 25 - 30, 2014.
[128] A. T. H. Houenouvo, W. Hofmann: Diagnostic of the transmission properties of slip ring system in doubly fed induction generators, 60th IEEE Holm Conference on Electrical Contacts, New Orleans, USA 12- 15 October, pp. 29 - 35, 2014.
[127] J. Jung, S. Ulbrich, W. Hofmann: Design Process of a High Torque Density Direct Drive Involving a Transverse Flux Machine, IEEE International Converence on Electrical Machines - ICEM, Berlin, pp. 1096 - 1102, 2014.
[126] C. D. Nguyen, W. Hofmann: Self-Tuning Adaptive Copper-Losses Minimization Control of Externally Excited Synchronous Motors, IEEE International Conference on Electrical Machines - ICEM, Berlin, 2014.
[125] Bastian Rückert: Direkte Leistungsregelung von doppeltgespeisten Asynchrongeneratoren mit optimaler Gleichtaktspannungsführung zur Minimierung von Lagerströmen, Hrsg.: Univ.-Prof. Dr.-Ing. Wilfried Hofmann, Band 4, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Shaker Verlag Aachen, 162 Seiten, April, 2014.
[124] F. Rüger, H.-D. Eberhardt, W. Hofmann, K. Milthaler: Energieeffiziente elektrische Antriebe mit permanenterregten Synchron-Außenläufermotoren für den Aufzugsbau, Lift-Report 3/ 2014, VFZ Verlag, Dortmund, 6 Seiten, 2014.
[123] J. Schützhold, K. Benath, V. Müller, W. Hofmann: Energy Efficiency based Design Criteria for Pump Drive Systems, EPE Journal, Vol. 24, No. 3, pp. 39 - 45, 2014.
[122] J. Schützhold, K. Benath, W. Hofmann: Auswahl energieeffizienter elektrischer Antriebe am Beispiel Förderanlagen, Antriebstechnik 53, Nr. 03, pp. 28 - 38, 2014.
[121] J. Schützhold, W. Hofmann: Auswahlkriterien für eine energieeffiziente elektrische Antriebstechnik, SPS IPC Drives 2014 Kongressband, 10 Seiten, 2014.
[120] J. Schützhold, K. Benath, V. Müller, W. Hofmann: Design criteria for energy efficient belt conveyor drives, Int. Symp. on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2014, Ischia, pp. 1256 - 1263, 2014.
[119] R. Seifert, R. Bargallo Perpina: Multiobjective optimization of IPM synchronous motor using Response Surface Methodology and filtered Monte Carlo approach, IEEE International Conference on Electrical Machines (ICEM), Proceedings, pp. 1307 - 1313, 2014.
[118] S. Tenner, A. Brix, W. Hofmann: Energy optimal pulse pattern for Z-source inverter to increase the efficiency of electric drive systems in automotive applications, EPE'14-ECCE Europe, Lappeenranta, pp. 1-10, 2014.
[117] T. Windisch, W. Hofmann: Automatic MTPA Tracking using Online Simplex Algorithm for IPMSM Drives in Vehicle Applications, IEEE Vehicle Power and Propulsion Conference, Coimbra, Portugal, 2014.
 
2013nach oben
[116] F. Bahr, M. Melzer, D. Karnaushenko, D. Makarov, G. Bermudez, O.G. Schmidt, W. Hofmann: Erfassung der Luftspaltinduktion aktiver Magnetlager auf Basis ultradünner, flexibler Hall-Sensoren, Magnetlagerworkshop Chemnitz-Zittau 2013, Tagungsband. S. 78-84, 2013.
[115] F. Bahr, M. Melzer, D. Karnaushenko, D. Makarov, G. S. C. Bermudez, O. G. Schmidt, W. Hofmann: Permanent Magnet Bias AMB Using Integrated Hall Sensor Based Air Gap Flux Density Feedback, 1st Brazilian Workshop on Magnetic Bearings, Rio de Janeiro, Brazil, 2013.
[114] H. Barth, F. Bahr, E. N. Hildebrand, W. Hofmann: Einsatz weichmagnetischer Pulververbundwerkstoffe in energieeffizienten Transversalflussmaschinen, Int. ETG-Kongress 2013, ETG-Fachbericht 04-01-02, Berlin 2013, 9 Seiten, 2013.
[113] K. Benath, J. Schützhold, W. Hofmann: Projektierungsregeln für energieeffiziente Pumpenantriebssysteme, Int. ETG-Kongress 2013, ETG-Fachbericht 139, ISBN 978-3-8007-3550-1, Berlin 2013, 9 Seiten, 2013.
[112] N.v. Binh, W. Hofmann: Control of Doubly-Fed Induction Generator Based Wind Turbine at Synchronous Operating Point, IEEE International Conference on Industrial Technology - ICIT, Cape Town, South Africa 2013, pp. 295-300, 2013.
[111] N.v. Binh, W. Hofmann: Regelung eines doppeltgespeisten Asynchrongenerators im synchronen Betrieb, VDE-VDI-Konferenz, Antriebssysteme Nürtingen 2013, ETG-Fachbericht 138, S. 64-69, 2013.
[110] J. Doering, G. Steinborn, W. Hofmann: Torque, Power, Losses and Heat Calculation of a Transverse Flux Reluctance Machine with Soft Magnetic Composite Materials and Disc-shaped Rotor, IEEE ECCE 2013, pp. 4326-4333, 2013.
[109] E. Fleischer, W. Hofmann: Elektromechanische Modellierung eines dreipoligen Kombilagers mittels des Lagrange-Formalismus, Magnetlagerworkshop Chemnitz-Zittau 2013, Tagungsband, pp. 12-20, 2013.
[108] W. Hofmann: Elektrische Maschinen, Lehrbuch, PEARSON-Verlag, 490 S., München, 2013.
[107] W. Hofmann: Traktionsmotoren im Antriebsstrang des Serien-Hybridbus AUTOTRAM, Elektrische Antriebstechnologie für Hybrid- und Elektrofahrzeuge (Hrsg.: H. Schäfer) Expert Verlag, Renningen 2013, S. 143-156., 2013.
[106] A. T. H. Houenouvo, W. Hofmann: Numerical analysis by current flow of mechanical components in double-fed asynchronous generators in Wind turbines, IEEE International Conference on Industrial Technology - ICIT, Cape Town, South Africa 2013, 6 pages, 2013.
[105] A. T. H. Houenouvo, R. Jensch, W. Hofmann: Design of measuring system to analyze the power transmission in the slip ring system in double fed induction generators (DFIG), IEEE ECCE 2013, pp. 5118-5122, 2013.
[104] H. Kasten, W. Hofmann: Wirkungsgradsteigerungen durch kombinierte Wicklungen, AntJournal (Vereinigte Fachverlage), H.1, S.22 - 25, 2013.
[103] W. Hofmann, B. Rabelo: Regelung von doppeltspeisenden Drehstromgeneratoren für den energieeffizienten Betrieb, Automatisierungstechnik vol. 61, H.5, S.318-328, 2013.
[102] J. Schützhold, K. Benath, V. Müller, W. Hofmann: Design Criteria for Energy Efficient Pump Drive Systems, IEEE EPE’13 – ECCE Europe, pp. 1 –10, 2013.
[101] J. Schützhold, W. Hofmann: Analysis of the Temperature Dependence of Losses in Electrical Machines, IEEE ECCE 2013, pp. 3159-3165, 2013.
[100] J. Schützhold, K. Benath, W. Hofmann: Berechnung des drehzahl- und lastabhängigen Wirkungsgrads von elektrischen Maschinen anhand von Datenblattangaben, Int. ETG-Kongress 2013, ETG-Fachbericht 139, ISBN 978-3-8007-3550-1, Berlin 2013, 8 Seiten, 2013.
[99] R. Suryana, W. Hofmann: Minimum Power Losses Operation of Wind Turbines With Doubly Fed Induction Generator, IEEE Int. Electrical Machines and Drives Conference, IEMDC 2013, 7 pages, 2013.
[98] S. Tenner, S. Günther, W. Hofmann: Loss Minimization of Electric Drive Systems Using a Z-Source Inverter in Automotive ApplicationsEPE’13 – ECCE Europe, P1 –P8, EPE’13 – ECCE Europe, P1 – P8, 2013.
[97] T. Windisch, Z. Cai, W. Hofmann: Energieoptimale Fahrzeugsteuerung für einen elektrisch angetriebenen Doppelgelenk-Hybridbus im Linienbetrieb, VDE-VDI-Konferenz, Antriebssysteme Nürtingen 2013, ETG-Fachbericht 138, S. 81-86, 2013.
[96] Y. Zhang, W. Hofmann: Auslegung einer Asynchronmaschine für Querschneiderantreibe bei hoher Drehmomentdynamik und transienter Stromverdrängung, VDE-VDI-Konferenz, Antriebssysteme Nürtingen 2013, ETG-Fachbericht 138, S. 40-45, 2013.
[95] Y. Zhang, W. Hofmann: Energy-efficient control of induction motors with high torque dynamics and transient skin effect, IEEE 39th Annual Conf. of Industrial Electronics Society IECON 2013, pp. 2771 -2776, 2013.
 
2012nach oben
[94] A. Arias, W. Hofmann: Carrier-Based PWM for Z-Source Inverters, IEEE Industrial Electronics Conference - IECON, Montreal, 2012.
[93] F. Bahr, M. Melzer, D. Karnaushenko, D. Makarov, D. Karnaushenko, J.I. Mönch, D. Malane, O.G. Schmidt, W. Hofmann: Flux Based Control of AMBs Using Integrated Ultra-Thin Flexible Bismuth Hall Sensors, The 13th International Symposium on Magnetic Bearings – ISMB13, Arlington, Virginia, USA, 2012.
[92] K. Benath, J. Schützhold, W. Hofmann: Projektierung der energieoptimalen Motor-Getriebe-Kombination von Servoantrieben, SPS-IPC Drives, 2012.
[91] L. Chen, W. Hofmann: Speed Regulation Technique of One Bearingless 8/6 Switched Reluctance Motors with Simpler Single Winding Structure, IEEE Transactions on Industrial Electronics, Vol. 59, No. 6, pp. 2592 - 2600, 2012.
[90] E. Fleischer, S. Tröger, W. Hofmann: Control of a Novel Integrated Radial-Axial Magnetic Bearing, The 13th International Symposium on Magnetic Bearings – ISMB13, Arlington, Virginia, USA, 2012.
[89] E. Fleischer, S. Tröger, W. Hofmann: Development of an Active Magnetic Bearing with a Soft Magnetic Composite Core, WMMM, 2012.
[88] S. Günther, R. Siebert, E. Beyer, W. Hofmann: Einfluss der Bearbeitung von Elektroblechen auf die Verluste elektrischer Fahrmotoren, ETG-Fachbericht-EMA, Nürnberg, 2012.
[87] A. T. H. Houenouvo, W. Hofmann: Finite element analysis of the contact problem between graphite-brushes and -slip rings in double fed asynchronous three-phase generators, IEEE International Conference on Power Electrical Systems - PES, Chemnitz, 2012.
[86] H. Kasten, W. Hofmann: Combined Stator Windings in Electric Machines with Same Coils, IEEE ICEM, Marseille, 2012.
[85] S. Krauß, N. Schwingal, W. Hofmann: Investigation of a 2/3-Step Voltage-Based Commutation Method for Matrix Converters, IEEE Applied Power Electronics Conference - APEC, Orlando, Florida, 2012.
[84] B. Rückert, W. Hofmann: Commutation Strategy for Minimized Common Mode Voltage Using DIrect Power Control, IEEE Applied Power Electronics Conference - APEC, Orlando, Florida, 2012.
[83] Th. Schuhmann, W. Hofmann, R. Werner: Improving Operational Performance and Energy Demand of Active Magnetic Bearings using Optimal State Estimation and State Feedback, IEEE Transactions on Industrial Electronics, Vol. 59, No. 2, pp. 821 - 829, 2012.
[82] R. Suryana, W. Hofmann: Network Voltage Stability Control Supported by Wind Power Generator, IEEE ICPERE, 2012.
[81] R. Suryana, W. Hofmann: Wind Power Generator Contribution to Network Frequency Stability, IEEE ICPERE, 2012.
[80] T. Windisch, W. Hofmann: Loss Minimization Control and Efficiency Determination of Electric Drives in Traction Applications, 2nd Energy Efficient Vehicle Conference, Dresden, 2012.
 
2011nach oben
[79] K. Benath, V. Müller, W. Hofmann: High Efficient Winding Drives with Continuous Variable Transmission (CVT), European Power Electronics and Drives Conference - EPE, Birmingham, UK, 2011.
[78] K. Benath, F. Klenke, W. Hofmann: Ansätze zur Beurteilung der Energieeffizienz von Antriebsystemen, ETG-Kongress, Fachtagung Energieeffiziente Antriebe und Leistungselektronik, ETG-Fachbericht 130, P 72, pp. 253--258, 2011.
[77] L. Chen, W. Hofmann: Modelling and control of one bearingless 8-6 switched reluctance motor with single layer of winding structure, European Power Electronics and Drives Conference - EPE, Birmingham, UK, 2011.
[76] M. Festa, W. Hofmann: Improved Performance through Multifunctional Material Utilization - Circumferential Cooling for Electric Motors, 1st International Electric Drives Production Conference - EDPC, Nürnberg, 2011.
[75] M. Festa, Y. Zhang, H.-D. Eberhardt, W. Hofmann: Extremely Efficient but Compact — A Circumferentially Cooled Induction Motor, IEEE International Conference on Electrical Machines and Systems - ICEMS, Beijing, China, 2011.
[74] E. Fleischer, Ch. Hufenbach, W. Hofmann: Experimentelle Bestimmung der Rotorverluste in einem homopolaren Magnetlager, VDE-VDI-Fachtagung Antriebssysteme, Nürtingen, 2011.
[73] E. Fleischer, W. Hofmann: Application of Soft Magnetic Composites in Active Magnetic Bearings, IEEE Industrial Electronics Conference - IECON, Melbourne, Australia, 2011.
[72] E. Fleischer, W. Hofmann: Auslegung eines Asynchronversuchsmotors mit Massivläufer für ein Hochgeschwindigkeitsmagnetlager, 8. Workshop Magnetlagertechnik Zittau-Chemnitz, 2011.
[71] G.-H. Geitner, G. Kömürgöz: Unified power flow based modelling of power split for Hybrid Electric Vehicles assuming three connections, IEEE CECNet International Conference on Consumer Electronics, Communications and Networks, Vol. 6, pp. 5464-5469, XianNing, China, 2011.
[70] W. Hofmann, M. Stiebler: Kap. V: Elektrotechnik in DUBBEL Taschenbuch Maschinenbau, Hrsg.: K.-H. Grote und J. Feldhusen, Springer Berlin, 23. Auflage, pp. V1-73, 2011.
[69] J. Jung, W. Hofmann: Investigation of Thermal Stress in the Rotor of Doubly-Fed Induction Generators at Synchronous Operating Point, IEEE International Electric Machines and Drives Conference - IEMDC, pp. 906-911, Niagara Falls, 2011.
[68] H. Kasten, W. Hofmann: Electrical Machines with Higher Efficiency Through Combined Star-Delta Windings, IEEE International Electric Machines and Drives Conference - IEMDC, pp. 1390-1395, Niagara Falls, 2011.
[67] F. Klenke, W. Hofmann: Energy-efficient control of induction motor servo drives with optimized motion and flux trajectories, European Power Electronics and Drives Conference - EPE, Birmingham, UK, 2011.
[66] V. F. Mendes, C.V. de Sousa, S. R. Silva, B. Rabelo, W. Hofmann: Modeling and Ride-Through Control of Doubly-Fed Induction Generators during Symmetrical Voltage Sags, IEEE Transactions on Energy Conversion, Vol.26, No.4, pp. 1161 - 1171, 2011.
[65] J. Schützhold, W. Hofmann: Messung und Analyse der temperaturabhängigen Verluste im Synchronmotor der Antriebsachsen einer Schlauchbeutel-Verpackungsmaschine, Intern. ETG-Kongress, Fachtagung Energieeffiziente Antriebe und Leistungselektronik, ETG-Fachbericht 130, 5.12, pp. 153--159, 2011.
[64] Thomas Schuhmann: Optimale Zustandsschätzung und -regelung an Magnetlagern mit integrierten kapazitiven Lagesensoren, Hrsg.: Univ.-Prof. Dr.-Ing. Wilfried Hofmann, Band 3, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Shaker Verlag Aachen, 268 Seiten, Okt., 2011.
[63] S. Tenner, S. Günther, W. Hofmann: Loss Minimization of Electric Drive Systems Using a DC/DC Converter and an Optimized Battery Voltage in Automotive Applications, IEEE Vehicle Power and Propulsion Conference, Chicago, USA, 2011.
[62] A. Tröger, T. Hempel, M. Würfel, W. Hofmann: Untersuchung der magnetischen Flussdichte in permanentmagnetisch erregten Synchronmaschinen in Außenläuferausführung, VDE-VDI-Fachtagung Antriebssysteme, Nürtingen, 2011.
[61] T. Windisch, W. Hofmann: Energieeffizienz des Traktionsantriebs in einem seriell-hybriden Doppelgelenkbus, 1. Tagung Hybridnahverkehrsbusse, Haus der Technik Essen e.V., 2011.
[60] T. Windisch, W. Hofmann: Loss Minimization of an IPMSM Drive Using Precalculated Optimized Current References, IEEE Industrial Electronics Conference - IECON, Melbourne, Australia, 2011.
 
2010nach oben
[59] L. Chen, W. Hofmann: Analysis of Radial Forces Based on Rotor Eccentricity of Bearingless Switched Reluctance Motors, IEEE International Conference on Electrical Machines - ICEM, Rom, Italy, 2010.
[58] L. Chen, W. Hofmann: Design Procedure of Bearingless High-speed Switched Reluctance Motors, International Symposium on Power Electronics, Electrical Drives, Automation and Motion - SPEEDAM, Pisa, Italy, 2010.
[57] R. De Doncker, W. Hofmann, A. Mertens, U. Schäfer: VDE Studie: Elektrofahrzeuge; Bedeutung, Stand der Technik, Handlungsbedarf, 2010.
[56] M. Festa, H.-D. Eberhardt, W. Hofmann: Inter-laminar Flux and Eddy Current Losses in a Circum-ferentially Cooled Stator Core, IEEE International Conference on Electrical Machines - ICEM, Rom, Italy, 2010.
[55] M. Festa, H.-D. Eberhardt, W. Hofmann: Advances in Power Density and Efficiency — Circumferentially vs. Conventionally Cooled Electric Motors, IEEE International Conference on Electrical Machines and Systems - ICEMS, 2010.
[54] G.-H. Geitner: The Bond Graph – an excellent modelling tool to study abstraction level and structure comparison, IEEE-VPPC, Lille, France, 2010.
[53] W. Hofmann: Pulssteuerverfahren mit minimierter Gleichtaktspannung, ETG-Workshop Stromrichtergespeiste Elektromaschinen, Hannover, 2010.
[52] H. Kasten, W. Hofmann: Optimal Number of Strands in Electrical Medium-Frequency Machines, IEEE International Conference on Electrical Machines - ICEM, Rom, Italy, 2010.
[51] F. Klenke, W. Hofmann: Energieeffiziente Bewegungssteuerung schwingfähiger Antriebssysteme, SPS-IPC Drives, Nürnberg, 2010.
[50] G. Kömürgöz, G.-H. Geitner: Power flow oriented modelling for teaching modelling of dynamical systems, International Journal for Knowledge, Science and Technology - IJKST, Vol. 1, pp. 15-21, 2010.
[49] S. Krauß, W. Hofmann: Input charge modulation of matrix converters used in direct torque control of induction machines, International Power Electronics and Motion Control Conference - EPE-PEMC, Ohrid, Macedonia, 2010.
[48] V. F.Mendes, C. V. de Souza, S. R. Silva, B. Rabelo, S. Krauß, W. Hofmann: Behavior of Doubly-Fed Induction Generator During Symmetrical Voltage Dips - Experimental Results, International Symposium on Industrial Electronics - ISIE, Bari, Italy, 2010.
[47] B. Rabelo, W. Hofmann: Doubly-fed Induction Generator Drives for Wind Power Plants in Wind Power, Hrsg.: Muyeen, S. M., Intech, pp. 114-140, 2010.
[46] Balduino Rabelo: Optimal Reactive Power Sharing with the Doubly-Fed Induction Generators in Wind Turbines, Hrsg.: Univ.-Prof. Dr.-Ing. Wilfried Hofmann, Band 1, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Shaker Verlag, Aachen, 234 Seiten, Jan., 2010.
[45] B. Rückert, W. Hofmann: Enhanced Direct Power Control of Doubly Fed Induction Generator, International Power Electronics and Motion Control Conference - EPE-PEMC, Ohrid, Macedonia, 2010.
[44] Marco Schramm: Bewegungsgrößenerfassung in magnetgelagerten Antrieben mit berührungslosen magnetischen Sensoren, Hrsg.: Univ.-Prof. Dr.-Ing. Wilfried Hofmann, Band 2, Dresdner Schriftenreihe zu elektrischen Maschinen und Antrieben, Shaker Verlag, Aachen, 136 Seiten, Nov., 2010.
[43] S. Tenner, W. Hofmann: A Comparison of Z-Source NPC and Z-source 2-Level Inverter, VDE-Kongress, 2010.
[42] T. Windisch, W. Hofmann: Verlustminimierung einer geregelten PMSM mit Reluktanzeffekt als Fahrmotor für einen Serienhybrid, ETG-Fachtagung und Elektromobilausstellung - EMA, ETG Fachbericht 126, pp. 127-132, 2010.
 
2009nach oben
[41] R. Baburske, D. Domes, J. Lutz, W. Hofmann: Passive Turn-On Process of IGBTs in Matrix Converter Applications, European Power Electronics and Drives Conference - EPE, Barcelona, Spain, 2009.
[40] T. Bach, D. Wöhner, K. Takahasi, K. Hattori, M. Liese, W. Hofmann: Determining Negative Sequence Currents of Turbine Generator Rotors, IEEE International Conference on Electrical Machines and Systems - ICEMS, Tokyo, Japan, 2009.
[39] M. Bruns, B. Rabelo, W. Hofmann: Investigation of Doubly-Fed Induction Generator Drives Behaviour at Synchronous Operating Point in Wind Turbines, European Power Electronics and Drives Conference - EPE, Barcelona, Spain, 2009.
[38] M. Festa, H.-D. Eberhardt, W. Hofmann: Design Aspects of Circumferentially Cooled Frameless Machines, IEEE International Conference on Electrical Machines and Systems - ICEMS, Tokyo, Japan, 2009.
[37] E. Fleischer, W. Hofmann: Einsatz von Pulververbundwerkstoffen in aktiven Magnetlagern zur Reduzierung der Rotorverluste, ETG-Kongress, ETG Fachbericht 119, pp. 35-40, Düsseldorf, 2009.
[36] R. Galindo-del-Valle, B. Rabelo, M. Cotorogea, W. Hofmann: On the Emulation of an Isolated Wind Energy Conversion System: Experimental Results, CERMA, pp. 6, Guernavaca (Mexiko), 2009.
[35] G.-H. Geitner, G. Kömürgöz: Power Flow Oriented Modelling - a Modern Method for Teaching Modelling of Dynamical Systems, 4th ENMA International Conference on Engineering and Mathematics, Bilbao, Spain, 2009.
[34] G.-H. Geitner, W. Hofmann: Teaching Power Flow Oriented Modelling of Dynamic Systems - Basics, European Power Electronics and Drives Conference - EPE, Barcelona, Spain, 2009.
[33] G.-H. Geitner: Modellbildung dynamischer Systeme mittels Leistungsfluß, VVD - Tagung Verarbeitungsmaschinen und Verpackungstechnik, pp. 345-372, Dresden, 2009.
[32] F. Klenke, W. Hofmann: Energieeffiziente Bewegungssteuerung von Linearmotoren, ETG-Kongress, ETG Fachbericht 119, pp. 97-102, Düsseldorf, 2009.
[31] F. Klenke, V. Müller, W. Hofmann: Energy optimal motion control of servo motors and downsizing of components, European Power Electronics and Drives Conference - EPE, Barcelona, Spain, 2009.
[30] B. Rabelo, W. Hofmann: Untersuchung des synchronen Betriebs von doppeltgespeisten Drehstrom-Asynchrongeneratoren, ETG-Kongress, ETG Fachbericht 119, pp. 135-141, Düsseldorf, 2009.
[29] B. Rabelo, W. Hofmann, J.L. da Silva, R.G. de Oliviera, S.R. Silva: Reactive Power Control Design in Doubly Fed Induction Generators for Wind Turbines, IEEE Transactions on Industrial Electronics, Vol. 56, pp. 4154-4162, 2009.
 
2008nach oben
[28] H.-A. Bärenklau, T. Bach: Experience with Model Simplifications for making a large FEM Calculation Case computable, IEEE International Conference on Electrical Machines - ICEM, Villamoura, Portugal, 2008.
[27] W. Hofmann: Energieoptimale Stellvorgänge und deren Auswirkung auf die Auslegung von rotatorischen und linearen Stellantrieben, VDI/VDE-Tagung Elektrisch-mechanische Antriebssysteme, VDI-Berichte Nr.1963, Böblingen, 2008.
[26] W. Lhomme, R. Zanasi, G.-H. Geitner, A. Bouscayrol: Different Graphical Descriptions of Clutch Modelling for Traction Systems, ElectrIMACS, Quebec, Canada, 2008.
[25] M. Paul, W. Hofmann, B. Frei: Schleppverluste bei permanenterregten Synchronmaschinen und deren Reduzierung, EMA Elektromobilausstellung und wiss. Konferenz, Aschaffenburg, 2008.
[24] B. Rabelo, W. Hofmann, R. Gaiba, J.L. da Silva, S.R. Silva: Reactive Power Control in Doubly-Fed Induction Generators for Wind Turbines, IEEE Power Electronics Specialists Conference - PESC, pp. 106-112, Rhodes, Greece, 2008.
[23] B. Rückert, W. Hofmann: Simulation of CMV-minimized Direct Power Control for Doubly Fed Induction Generators, 1st EPE Wind Energy Chapter, Delft, Netherlands, 2008.
[22] B. Rückert, W. Hofmann: CMV-minimized Direct Power Control of the Grid Side Connected Converter in Doubly Fed Induction Generators, International Symposium on Power Electronics, Electrical Drives, Automation and Motion - SPEEDAM, pp. 1455-1459, Ischia, Italy, 2008.
[21] B. Rückert, W. Hofmann: Direkte Leistungsregelung von doppeltspeisenden Asynchrongeneratoren zur Minimierung der Gleichtaktspannung, VDI/VDE-Tagung Elektrisch-mechanische Antriebssysteme, VDI-Berichte Nr.1963, Böblingen, 2008.
[20] M. Schramm, W. Hofmann: Magnetic Displacement and Velocity Sensor for Robust Control of Active Magnetic Bearing, IEEE Sensors, Salente, Italy, 2008.
[19] J.L. da Silva, R.G. de Oliviera, S.R. Silva, B. Rabelo, W. Hofmann: A Discussion about a Start-up Procedure of a Doubly-Fed Induction Generator System, NORPIE, Helsinki, Finland, 2008.
[18] R. Zanasi, G.-H. Geitner, A. Bouscayrol, W. Lhomme: Different energetic techniques for modelling traction drives, ElectrIMACS, Quebec, Canada, 2008.
 
2007nach oben
[17] A. Binder, M. Doppelbauer, P. Gold, W. Hofmann: Antriebssysteme: Innovationen - Trends - Mechatronik, ETZ, Heft 4, pp. 60-69, 2007.
[16] T. Bocklisch, W. Hofmann: Optimal and predictive energy management of Photovoltaic-Fuel cell hybrid systems with short-time energy storage., International Conference on Power Conversion, Intelligent Motion and Power Quality - PCIM, 2007.
[15] L. Chen, W. Hofmann: Design of one rotary-linear permanent magnet motor with two independently energized three phase windings, IEEE Power Electronics and Drive Systems Conference - PEDS, pp. 1372-1376, Bangkok, Thailand, 2007.
[14] L. Chen, W. Hofmann: Performance Characteristics of One Novel Switched Reluctance Bearingless Motor Drive, Power Conversion Conferences - PCC, pp. 608-613, Nagoya, Japan, 2007.
[13] D. Domes, W. Hofmann: SiC-JFET in Contrast to High Speed IGBT in Matrix Converter Topology, IEEE Power Electronics Specialists Conference - PESC, pp. 54-60, Orlando, USA, 2007.
[12] B. Frei, W. Hofmann: Schlepp- und Stillstandsverluste in Hybridfahrzeugen mit Leistungsverzweigung, Internationaler ETG-Kongress - Fachtagung Hybridantriebstechnik und Energieeffiziente elektrische Antriebe, ETG-Fachbericht 107, pp. 65-74, Karlsruhe, 2007.
[11] W. Hofmann, M. Stiebler: Kap. V: Elektrotechnik in DUBBEL Taschenbuch Maschinenbau, Hrsg.: K.-H. Grote und J. Feldhusen, Springer Berlin, 22. Auflage, pp. V1-68, 2007.
[10] W. Hofmann: Kap. 8: Elektrische Maschinen und Antriebe in Taschenbuch der Elektrischen Energietechnik, Hrsg.: W. Schufft, Hanser Fachbuch, pp. 349-406, 2007.
[9] S. Krauß, W. Hofmann: Binary Magnet Field Sensors as Information Source for Alternate Current Directions in Direct and Indirect Frequency Converters, AFRICON, Windhoek, Namibia, 2007.
[8] S. Krauß, W. Hofmann: Threshold Triggered Magnetic Filed Sensors for Detecting the Load Current Direction for Frequency Converters, European Power Electronics and Drives Conference - EPE, Aalborg, Denmark, 2007.
[7] B. Rabelo, W. Hofmann: Simple Fault Ride-Through Capability Analysis for Wind Power Plants under Different Grid Code Requirement, European Power Electronics and Drives Conference - EPE, Aalborg, Denmark, 2007.
[6] B. Rückert, W. Hofmann: Direkte Leistungsregelung des netzseitigen Stromrichters bei doppeltgespeisten Asynchrongeneratoren, 12. Symposium Maritime Elektrotechnik, pp. 309-315, Rostock, 2007.
[5] M. Schramm, W. Hofmann: Novel Magnetic Displacement Sensor for Mechatronical Systems, International Conference of the IEEE Industrial Electronics Society - IECON, pp. 2219-2224, Taiwan, 2007.
[4] W. Schröppel, A. Mertens, B. Ponick, W. Hofmann, O. Drubel u.a.: Effizienz- und Einsparpotentiale elektrischer Energie in Deutschland - VDE-Studie, Energietechnische Gesellschaft, 100 Seiten, 2007.
[3] Th. Schuhmann, W. Hofmann, E. Fleischer: Potentials of Reducing the Power Requirement of Magnetic Suspension Systems by Implementing a Linear Quadratic Gaussians Controller, European Power Electronics and Drives Conference - EPE, Aalborg, Denmark, 2007.
[2] Th. Schuhmann, W. Hofmann: Erhöhung der Energieeffizienz schnelldrehender elektrischer Antriebe durch den Einsatz aktiver magnetischer Lagerungen, Internationaler ETG-Kongress - Fachtagung Hybridantriebstechnik und Energieeffiziente elektrische Antriebe, ETG-Fachbericht 107, pp. 227-236, Karlsruhe, 2007.
[1] K. Stadie, M. Würfel, W. Hofmann: Verlängerte Standzeit bei doppeltgespeisten Drehstrom-Asynchrongeneratoren, Antriebstechnik, Heft 7, pp. 46-49, 2007.
 
Powered by bibtexbrowser

 

Kontakt
Aktuelles

 Sekretariat:
Frau Peggy Martin
Tel.: +49 351 463-33223
Fax: +49 351 463-33655
Helmholtzstr. 9,
icon_email
peggy.martin@tu-dresden.de

Sitz
Helmholtzstr. 9,
Görgesbau, Raum 206


Postanschrift:
TU Dresden
Elektrotechnisches Institut
01062 Dresden

Pakete:
TU Dresden
Elektrotechnisches Institut
Helmholtzstraße 9
01069 Dresden

Webmaster emaweb@mailbox.tu-dresden.de